- Hotline: 091-187-1111
Portable Solutions
Van Air Systems offers portable compressed air drying solutions for a wide range of applications, from temporary plant back-up to mobile abrasive blasting and painting. The Prep 40 series of air dryers are well suited for plant back-ups, pipeline dehydration and any compressed air application requiring a -40 pressure dew point. The Blast Pak series is perfect for the mobile blasting and painting contractor who needs to keep moisture out of blast pots and nozzles. For more information, contact us at 02-168-3193-5, Hotline: 091-187-1111 or Line ID: @multiphase
Dry Pak PRO
The Dry Pak PRO is a portable compressed air system designed for flows up to 185 SCFM. With no power requirements this system can be used virtually anywhere. This portable skid mounted system consists of a D12 Deliquescent Dryer, F200-265 Filter, aftercooler with air motor, rock guard, and a regulator lubricator. The DryPak 150 is a low cost portable air drying system is perfect for small jobs where portability and dry air matter.
Features & Benefits
- 10 year vessel warranty
- 185 SCFM @ 125 PSIG
- 250 PSIG maximum working pressure
- Free initial fill of DRY-O-LITE desiccant
Dry Pak Pro Duo
The Dry Pak Duo was design that came from the common question we hear, “ Can I get the air even dryer?”. The answer is Yes! The Dry Pak Duo has the same components as the Blast Pak PRO, but with another drying level. This unit was designed for applications that require lower dew points than what our Dry-O-Lite desiccant can provide. Using two deliquescent dryer vessels in a series enables you to achieve a lower dew point. By using Dry-O-Lite desiccant in the first dryer vessel it will knock out a majority of the moisture. This pre-dryer will also reduce the consumption of 10BF which is in the second dryer. At 100PSIG and inlet temperatures up to 250°F, the Dry Pak Pro Duo can achieve pressure dewpoints down to 29°F using 10BF desiccant.
Features & Benefits
- Air Cooled Aftercooler with Air Motor
- 50 SCFM Max Flow Rating
- No Moving Parts
- Low Dew Point
Blast Pak PRO
The Blast Pak PRO is a portable compressed air drying system designed for mobile blasting contractors and industrial worksites. Built as a single-tower deliquescent dryer on a forklift skid, it is pre-assembled for easy setup and mobility, allowing quick transport on a truck, trailer, or around a plant. Moisture in compressed air often clogs blasting pots and causes flash rust, leading to costly rework. The Blast Pak PRO solves this with an integrated aftercooler that condenses moisture, a Dry-O-Lite desiccant bed that reduces humidity, and an after-filter that removes fine particulates. The result is cool, clean, and dry compressed air that ensures superior blasting quality, protects equipment, and minimizes downtime.
Features & Benefits
- No electricity required, plug-n-play design
- Two step interior and exterior paint for longer vessel life
- F200 filter and muffler to eliminate oil residue from air motor
- Removable aftercooler assembly for ease of repair / replacement
- 3/4″ Auxiliary air connection before the dryer
- Lifting lugs and steel forklift skid for portability
- Tie downs to secure units for transportation
- Two sight windows for desiccant viewing
- Free initial fill of DRY-O-LITE desiccant included and shipped separately
- 15 years prorated warranty on Dryer Pressure vessel (1st 5 years Full 100% warranty)
Prep 40
Prep 40 compressed air dryers have been designed for the rugged demands of the equipment rental industry. Heavy duty structural steel frame work protects key components. The skid is “sled style” allowing it to be easily dragged and pushed about a job site. These dryer skids are as close to plug-n-play as equipment gets. Just hook up compressed air hoses, supply 115v power, and the dryer is ready to begin working. The Prep 40 will deliver compressed air with a pressure dew point of -40, residual oil content of .008 ppm, and removal of particulates greater than 1 micron. The Prep 40 is ideal for supplying back-up compressed air treatment to a wide range of industrial facilities that have stringent air quality requirements. The Prep 40 is also ideal for meeting air quality standards in pipeline hydrostatic testing, pigging, and dehydration operations.
Features & Benefits
- Completely portable package
- Pneumatic drain valve included
- Simple to install
- Delivers -40°F Dewpoint
- Lifting lugs and steel forklift skid for portability
HOTLINE:
091-187-1111
EMAIL:
sales@multiphase-og.com
LINE ID:
@multiphase